Toyana NN3018 K cylindrical roller bearings

Y0:2.78; rs min:2.1 mm; D:180 mm; Y1:2.84; Characteristic inner ring frequency, BPFI:10.39 Hz; Nlim:4,600 rpm; Min operating temperature, Tmin:-20 °C; Characteristic rolling element frequency, BSF:6.23 Hz; Static load, C0:495 kN; b:11.2 mm;

Dimension N:20.8 in; Dimension V:9.3 in; Series Type:Medium Series; Tensioning Unit Type:Tension Type; Seal Type:High Temperature Pac; Support Type:Take-Up; Bearing - Housing - Seal:MSE600BRHHTPS; Maximum Speed:1320 rpm; Dimension P:1.0 in; Cr - Dynamic Load Rating:164111 lbf;

Shape:Flanged Pilot Type; Days to Ship:7 Days; Bearing Retained:No; Shape:Flanged Pilot Type; Type:Bearings with Housin; Bearing Material:[Steel] Steel; Flange O.D. H(φ):62; Type:Bearings with Housin; Bearing I.D. d(mm):15; Bearing Part Number:6002;

Bearing Configuration:Thrust TTHD - with c; r - Fillet Radius Housing (Max):0.44 in; B:4.6250 in; D - Bearing O.D.:21.2500 in; R - Fillet Radius Shaft (Max):0.06 in; Static Load Rating:4350000 lbf; Bearing Type:Thrust Tapered Rolle; Weight:324.1 lb; Dynamic Load Rating:319000 lbf; d - Bore Diameter:

d1:6 15/16 in; Locknut:KM38; G:M190x3; Weight:10.00 Kg; C:31 mm; Appropriate Hydraulic Nut:HMV38; L1:169.00 mm; D3:240 mm; Lockwasher and Lockplates:MB38;

Bearing Used:Deep Groove Ball Bea; Type:Bearings with Housin; Type:Bearings with Housin; Bearing Part Number:6002; Seals:DD (Contact Rubber S; Flange Shape:Round Type; Days to Ship:7 Days; Flange O.D. H(φ):62; Bearing I.D. d(mm):15; Holder Surface Treatment:Clear Anodize;

Bearing Unit, Type:Round flange shape; Days to Ship:Quote; Accessory:With cast iron cover; Bearing Inner Dia. Shape:Cylindrical Bore Set; RoHS:6; Bearing Unit, Type:Round flange shape; Bearing Inner Dia. Shape:Cylindrical Bore Set; Rolling Element Material:Bearing Steel; Stroke:No; Diameter series s

Specifications/Environment:Standard; Max. Allowed rpm(rpm):8700; Number of Raceway Ring Rows:Single Row; Type:Ball; Holder Symbol:JR; Size Standards:Metric System; d:55; Seal, Shield Symbols:ZZ; Inner/Outer Ring Material:Steel; D:72;

Rolling Element Material:Bearing Steel; RoHS:6; Unit Body Material:Cast Iron; Bearing Inner Dia. Shape:Tapered hole adapter; Surface Treatment:No; Basic Load Rating, Dynamic Rating(N):72700; Seal:Silicone; Accessory:With cast iron cover; Days to Ship:8 Days; Machining:No;

Shaft Size:6-7/16 in; Dimension K :4-5/8 in; Cor - Static Load Rating:178165 lbf; Dimension H2:16 in; Cr - Dynamic Load Rating:121183 lbf; Dimension J2 :20-7/8 in; Series Type:Light Series; Dimension H :7-1/2 in; Seal Type:Felt Type; Bearing Number:LSE607BR;

T min.:-20 °C; N:38mm; S:42 mm; C0:140 kN; C:171.6 kN; G:M10x1; d:101.6 mm; A:94 mm; T max.:100 °C; Weight:25.6 kg;

Ab - Cage-Cone Frontface Clearance:0.11 in; Cage Type:Stamped Steel; Cone Part Number:566; Y1 - ISO Factor9:1.86; R - Cone Backface To Clear Radius1:0.14 in; Ca90 - Dynamic Thrust Rating (90 million revolutions)6:7130 lbf; K - Factor7:1.61; e - ISO Factor8:0.36; C1 - Dynamic Radial Rating (Two-Row,

e - ISO Factor8:0.5; B:47.625 mm; Aa - Cage-Cone Backface Clearance:6.3 mm; C0 - Static Radial Rating:266000 lbf; Y - ISO Factor9:1.2; G1 - Heat Generation Factor (Roller-Raceway):1820; Cage Type:Stamped Steel; R - Cone Backface To Clear Radius1:12.700 mm; r - Cup Backface To Clear Radius2:3.30 mm;

d:35 mm; T max.:100 °C; C:25.7 kN; J1:45 mm; e:15 mm; Designation of bearing:US207G2T04; H:155 mm; L:90 mm; S:8.5 mm; N:14mm;

Bearing I.D. d(mm):12; Width T(mm):12; Bearing Retained:Yes (with retaining; Bearing Used:Deep Groove Ball Bea; RoHS:6; Height H(mm):20 ～ 40; C Chamfered:Provided; Lateral Width L(mm):56; Holder Surface Treatment:Clear Anodize; Bearing Material:Stainless Steel;